Skip to content
RocketMod

Setup RocketMod Cronus Zen From A-Z 🚀🔥 (Anti RECOIL, ++ Aim ASSIST, PS5 Bypass)

Complete A to Z guide to install and configure RocketMod on Cronus Zen: Anti-Recoil, Aim Assist++, PS5 Bypass, and best practices.

SETUP ROCKETMOD CRONUS ZEN FROM A-Z 🚀🔥 (Anti RECOIL, ++ Aim ASSIST, PS5 Bypass)

This tutorial walks you step by step to install, configure, and save your RocketMod settings on Cronus Zen, focusing on Anti-Recoil, Aim Assist++, and PS5 Bypass.

🎥 Tutorial Video

Watch on youtube

✅ Requirements

  • Cronus Zen + quality USB-C/USB-A cable
  • Zen Studio installed (Windows)
  • Latest RocketMod AIM (COD) GPC script
  • Controller (PS5/PS4/Xbox depending on platform)
  • Internet connection for updates

🧰 Step 1 — Update Zen Firmware

  1. Plug the Zen into your PC in program mode (press reset button if needed).
  2. Open Zen Studio → Tools → Firmware Update and install the latest version.
  3. Restart Zen when prompted.

📦 Step 2 — Install RocketMod (GPC)

  1. Open Zen Studio → Programmer.
  2. Drag the RocketMod AIM (COD) pack into a slot (e.g., Slot 1).
  3. Click Program Device to flash slots.
  4. Replug if necessary, then check your active Slot on the Zen.

🎯 Step 3 — Aim Assist ++ (safe values)

  • Enable Aim Assist in the script in‑game menu.
  • Start with safe default values.
  • Increase Force/Speed in +2 steps until you feel smooth assist (avoid visible shaking).
  • Test in private match before going online.

Tip: Match your in‑game FOV/sensitivity with the script’s guide for best results.

🔧 Step 4 — Anti‑Recoil (AR)

  1. Enable Anti‑Recoil (AR).
  2. Pick a preset for your weapon or use Live Tuning (UP/DOWN) to adjust elevation.
  3. Adjust Vertical first, then Horizontal if needed.
  4. Save your weapon profiles (see “Saving” section).

Pro tip: Adjust slowly (0 → +10) with short bursts, then full auto. Keep it natural.

🔓 Step 5 — PS5 Bypass (if needed)

  • Follow the method shown in the video (Remote Play or Controller Auth depending on setup).
  • Check Zen LEDs/states to confirm authentication.
  • For lowest latency: use Ethernet, close background apps.

💾 Saving & Shortcuts (in‑game)

  • Open script menu: combo shown in video/overlay (e.g., L2+OPTIONS / LT+MENU).
  • Navigate with d-pad/joystick, confirm with X/A.
  • Save: dedicated action (B/CIRCLE by default) or via menu option.
  • Change Slot: Zen button or script combo.

Always save before exiting to keep your Aim/AR/Bypass settings stored.

🧪 Recommended Starter Profile

  • Aim Assist++: RocketMod default safe values
  • Anti‑Recoil: Vertical +4 → +8 (depending on gun), Horizontal 0 → +2
  • Ease‑in/Ease‑out: low to medium
  • Modulation: low (avoids shake)
  • Enemy Ping Timer: 0 or 1 (if used)

Change one value at a time, test, and take notes.

🛠️ Quick Troubleshooting

  • Menu doesn’t open: check combo, active Slot, and if script flashed correctly.
  • Shaky aim: lower Aim Assist force/modulation.
  • AR too strong: decrease vertical, check in‑game FOV/sensitivity.
  • Bypass unstable: use wired connection, close apps, restart Zen.
  • Input lag: disable overlays/recorders, stick to 60/120Hz native.

❓FAQ

Q: Can I use these settings everywhere?
A: Yes, but tweak per game/weapon. Test in private first.

Q: Does this replace practice?
A: No. Script only assists aim. Train your raw aim too.

Q: My Zen isn’t detected
A: Try different port/cable, reinstall drivers in Zen Studio.

📚 Resources

🔗 Related Articles

🚀 Essential Setup

🎯 Core Features

🔄 Configuration & Management

🚀 Next Steps

← Previous: Cronus Zen Registration
Next →: Button Layout Guide - Essential for proper configuration

Continue your setup journey by configuring your button layout to match your in-game settings.

Made with ❤️ for the RocketMod community.